Description
LISEN Magnetic Phone Holder for Car, [Easily – Features & Prices in Saudi Arabia :
LISEN Magnetic Phone Holder for Car, [Easily Install] Car Phone Holder Mount [6 Strong Magnets] Cell Phone Holder for Car Case Friendly iPhone Car Holder Compatible with All Smartphones & Tablets
Test video – LISEN Magnetic Phone Holder for Car, [Easily :
Product highlights :
Questions & Answers – LISEN Magnetic Phone Holder for Car, [Easily :
Technical specifications – LISEN Magnetic Phone Holder for Car, [Easily :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
O. K (verified owner) –
Works good – blocks vent – Works great- puts the phone where I can see it and not block my view when I’m driving. It blocks my main driver vent but after buying many other designs- this works the best! You have to add metal plates over the middle of the phone case so disables any wireless charging unless you take yr case off.
K. C (verified owner) –
Buy the two pack. You’re welcome. – I got it for my 2014 Chevy Malibu LS. It worked very well for about a year and a half, comes with extra magnets for if you get a new phone or just have extra devices. Something I never had thought about but it does happen. The heat from your vents in the colder months will ware the plastic down on the clamp. It wasn’t melted but seemed to just snap off and appeared white on the edges, was super warm. For what it’s priced I give it a 10/10 for sure but they could add a different material for the clamp in my opinion.
T. B (verified owner) –
Sucked it up Buttercup – First off, I did notice that the attaching hook that goes inside your vent was a little wider than my vent space (2015 Odyssey), so all I did was just ever so gently separate my vents so I could slide it in between and once it’s in I don’t need to take it out. Though I did decide to change which event I was using and getting it out was not difficult. I wanted to test the strength of the magnets in the base, so I left my phone in my old case with the metal disk attached to the outside and I set it on the new base.
M. D (verified owner) –
Pretty good! – I last bought a different brand that also mounts on the air vent that was magnetic but it damaged my air vents and scratched it really bad. The way this one attaches to the air vent is pretty awesome, it doesn’t scratch it nor does it slide down cause its attached around the one vent instead of on top. The magnets are pretty strong too, they give you a few of them in different sizes. I’ve put my iPhone XR on it and my brothers iPhone 14 pro max and it DOES NOT slide down or to the side like most other brands. Of course the exception to this is that if you don’t center the magnet on the phone with the magnet on the mount then it might slightly slide to the side but that’s common sense. Either way its. strong 5 stars!
A. R (verified owner) –
Easy to use – Had gone through a couple of phone mounts for my car. This one is simple to use and easy to transfer to another car. I only wished there was a mount similar to this that would charge my phone at the same time.
K. E (verified owner) –
Se ajusta muy bien y no se cae el teléfono – Me pareció muy fácil de instalar y el teléfono se ajusta perfecto y con firmeza. Además lo puedo mover en la posición que necesite!
M. D (verified owner) –
Pretty good! – I last bought a different brand that also mounts on the air vent that was magnetic but it damaged my air vents and scratched it really bad. The way this one attaches to the air vent is pretty awesome, it doesn’t scratch it nor does it slide down cause its attached around the one vent instead of on top. The magnets are pretty strong too, they give you a few of them in different sizes. I’ve put my iPhone XR on it and my brothers iPhone 14 pro max and it DOES NOT slide down or to the side like most other brands. Of course the exception to this is that if you don’t center the magnet on the phone with the magnet on the mount then it might slightly slide to the side but that’s common sense. Either way its. strong 5 stars!
A. R (verified owner) –
Easy to use – Had gone through a couple of phone mounts for my car. This one is simple to use and easy to transfer to another car. I only wished there was a mount similar to this that would charge my phone at the same time.
T. B (verified owner) –
Sucked it up Buttercup – First off, I did notice that the attaching hook that goes inside your vent was a little wider than my vent space (2015 Odyssey), so all I did was just ever so gently separate my vents so I could slide it in between and once it’s in I don’t need to take it out. Though I did decide to change which event I was using and getting it out was not difficult. I wanted to test the strength of the magnets in the base, so I left my phone in my old case with the metal disk attached to the outside and I set it on the new base.
K. T (verified owner) –
Great Product! – Magnet is strong, the adhesion stays really well to the phone, mounting system is pretty simple to install. Mount does stick out quite a bit so it is a little weird looking but over all a great product. I will be buying more in the near future for my other 2 vehicles.
K. E (verified owner) –
Se ajusta muy bien y no se cae el teléfono – Me pareció muy fácil de instalar y el teléfono se ajusta perfecto y con firmeza. Además lo puedo mover en la posición que necesite!
K. C (verified owner) –
Buy the two pack. You’re welcome. – I got it for my 2014 Chevy Malibu LS. It worked very well for about a year and a half, comes with extra magnets for if you get a new phone or just have extra devices. Something I never had thought about but it does happen. The heat from your vents in the colder months will ware the plastic down on the clamp. It wasn’t melted but seemed to just snap off and appeared white on the edges, was super warm. For what it’s priced I give it a 10/10 for sure but they could add a different material for the clamp in my opinion.
O. K (verified owner) –
Works good – blocks vent – Works great- puts the phone where I can see it and not block my view when I’m driving. It blocks my main driver vent but after buying many other designs- this works the best! You have to add metal plates over the middle of the phone case so disables any wireless charging unless you take yr case off.
L. Z (verified owner) –
Good product except one thing. Read review – The product was easy to install. Good snug grip on the cars A/C vent. Adjusted to viewing angle with no problem. I only rated it with 4 stars due to the adhesive used on the metal plates that attach to the phone or phone case is sub standard for the type of application. The PVC phone case was cleaned and dried with rubbing alcohol prior to placing the adhesive side of the metal plate on the phones pvc case. Even with pressure applied the adhesive would not stick. Repeated the process again but this time directly on the phone backing with a different metal plate that was supplied. Again adhesive would not stick. So trying again roughed up the pvc case surface with corse grit sandpaper. Cleaned it. Applied silicone contact adhesive to both surfaces allowed to dry to a tacky touch then pressed the case and metal plate together let it sit for 8 hours to cure. A has held with no problem ever since even in the direct sun and humid climate we’re I live.
K. T (verified owner) –
Great Product! – Magnet is strong, the adhesion stays really well to the phone, mounting system is pretty simple to install. Mount does stick out quite a bit so it is a little weird looking but over all a great product. I will be buying more in the near future for my other 2 vehicles.
L. Z (verified owner) –
Good product except one thing. Read review – The product was easy to install. Good snug grip on the cars A/C vent. Adjusted to viewing angle with no problem. I only rated it with 4 stars due to the adhesive used on the metal plates that attach to the phone or phone case is sub standard for the type of application. The PVC phone case was cleaned and dried with rubbing alcohol prior to placing the adhesive side of the metal plate on the phones pvc case. Even with pressure applied the adhesive would not stick. Repeated the process again but this time directly on the phone backing with a different metal plate that was supplied. Again adhesive would not stick. So trying again roughed up the pvc case surface with corse grit sandpaper. Cleaned it. Applied silicone contact adhesive to both surfaces allowed to dry to a tacky touch then pressed the case and metal plate together let it sit for 8 hours to cure. A has held with no problem ever since even in the direct sun and humid climate we’re I live.