Description
SodaRide Car Cup Holder Expander 2 Pack – Features & Prices in Saudi Arabia :
SodaRide Car Cup Holder Expander 2 Pack with Large Size Detachable Food Tray, Car Drink Holder Adapter with Solid Base – Fits Yeti, Hydro Flask, 32/40 oz, Road Trip Essential Car Travel Accessories
Test video – SodaRide Car Cup Holder Expander 2 Pack :
Product highlights :
Questions & Answers – SodaRide Car Cup Holder Expander 2 Pack :
Technical specifications – SodaRide Car Cup Holder Expander 2 Pack :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
G. T (verified owner) –
Nice! – Sturdy and very useful. I can place my phone, sunglasses & have room for a snack!
G. D (verified owner) –
Me encanto!!! – De muy buen tamaño y robusto
Z. I (verified owner) –
Nice for traveling – Makes it easier to eat in your car before you start driving.
P. M (verified owner) –
Does the trick – I don’t love having it there all the time, but when I need it, it’s very useful. It’s not super easy to tighten (no leverage to squeeze the little knob inside to squeeze & turn to tighten in the cup holder). But once it’s tight, it stays in place. the 2nd cup holder hasn’t worked yet (it’s an empty hole, so either it’s too small or it’s too big & the cup falls right through. Also, I bought the one w/an additional cup holder, thinking it was all part of the same kit to have TWO cup holders, when actually the original kit has 2 cup holders (and a tray), and this ADDITIONAL cup holder is for another car, just to make your car cup holder LARGER to fit cups like Yeti’s. I only have one car, so obviously I didn’t need to spend the extra ~$20 for this piece. my bad.
S. D (verified owner) –
Useful – This is very useful if you have an extended commute . Easy to install . Center console shifter needs to be in drive when you set up in his truck it did not clear it in drive
R. D (verified owner) –
Sturdy, but was incompatible with my Jerp Cherokee because of the console layout. – I really wanted this to work. Unfortunately, the tray covered my gear shift if I tried to swing it towards me (the driver). Due to the vertical orientation of the drink openings on our console, this unit is only great for the passenger. There’s no way to swing it around for the driver to hold their food closer to them.
G. D (verified owner) –
Me encanto!!! – De muy buen tamaño y robusto
S. D (verified owner) –
Useful – This is very useful if you have an extended commute . Easy to install . Center console shifter needs to be in drive when you set up in his truck it did not clear it in drive
Z. I (verified owner) –
Nice for traveling – Makes it easier to eat in your car before you start driving.
R. D (verified owner) –
Sturdy, but was incompatible with my Jerp Cherokee because of the console layout. – I really wanted this to work. Unfortunately, the tray covered my gear shift if I tried to swing it towards me (the driver). Due to the vertical orientation of the drink openings on our console, this unit is only great for the passenger. There’s no way to swing it around for the driver to hold their food closer to them.
P. M (verified owner) –
Perfect for everything. Just really love it – Love the sturdiness. Perfect for my phone and my glasses
G. T (verified owner) –
Nice! – Sturdy and very useful. I can place my phone, sunglasses & have room for a snack!
P. M (verified owner) –
Perfect for everything. Just really love it – Love the sturdiness. Perfect for my phone and my glasses
P. M (verified owner) –
Does the trick – I don’t love having it there all the time, but when I need it, it’s very useful. It’s not super easy to tighten (no leverage to squeeze the little knob inside to squeeze & turn to tighten in the cup holder). But once it’s tight, it stays in place. the 2nd cup holder hasn’t worked yet (it’s an empty hole, so either it’s too small or it’s too big & the cup falls right through. Also, I bought the one w/an additional cup holder, thinking it was all part of the same kit to have TWO cup holders, when actually the original kit has 2 cup holders (and a tray), and this ADDITIONAL cup holder is for another car, just to make your car cup holder LARGER to fit cups like Yeti’s. I only have one car, so obviously I didn’t need to spend the extra ~$20 for this piece. my bad.
N. N (verified owner) –
Good Product Overall – I like this cupholder and tray attachment. Please note that if you will be moving the tray alot you will have to adjust the grip of the cupholder every so often because it does become lose. Not a lot but enough to notice some wiggle. All these pictures are on a Mazda CX-5 unless it says otherwise. I included some instructions in the pictures. I love that my mugs stay put even without any liquids in them. There is more than enough space for the handle so it is not tilted at all. However, if you have a tumbler with a smaller base like the one pictured it does tilt. Nothing is holding the tumbler in place since it’s a smaller base. The tray cup holder has no bottom and I was annoyed by it and thought I could not put anything in it. UNTIL I noticed that it was built for store disposable cups with that little groove pictured and it holds it just fine. Beware not to get the big cups since the indentation is small and the weight of the big cup will make it fall over. Keep the big cups in the base cupholder. As you can see my tumbler won’t fit next to the cupholder. A second cupholder would not fit in the Mazda side by side either which disappointed me. I think this all depends on where your car cupholder is located. However, since my cup holder is low between the two seats I am happy that the tray still sits high enough to work for the passenger even if they have thick thighs like me. I installed the cup holder in the back cup because the tray would intervene with the dash board and gear stick. NOW I bought this item because I was going on a road trip and I wanted to be able to use the two pack cup holder and tray. We got a rental car for this trip (Toyota Highlander Hybrid 2022). I decided to try the two cup holders side by side on the Highlander and to my surprise THEY FIT!!!!!!! ☺️ I was so freaking excited!! We had a great trip with our drinks and my husband approved of the cupholder as well. So if you have cup holders like the Highlander you might be able to get away with side by side fit. If you have cupholders like the Mazda. I’m sorry but it won’t work for you. Wish it worked with my Mazda since it is my main car . But oh well! PS: if you have a cup holder cover like the one in the advertisement picture they are right. The cup holder does NOT fit. That’s what my husband’s car has so now I do not know what to do with my second cupholder. Guess I have to buy a Highlander now!
N. N (verified owner) –
Good Product Overall – I like this cupholder and tray attachment. Please note that if you will be moving the tray alot you will have to adjust the grip of the cupholder every so often because it does become lose. Not a lot but enough to notice some wiggle. All these pictures are on a Mazda CX-5 unless it says otherwise. I included some instructions in the pictures. I love that my mugs stay put even without any liquids in them. There is more than enough space for the handle so it is not tilted at all. However, if you have a tumbler with a smaller base like the one pictured it does tilt. Nothing is holding the tumbler in place since it’s a smaller base. The tray cup holder has no bottom and I was annoyed by it and thought I could not put anything in it. UNTIL I noticed that it was built for store disposable cups with that little groove pictured and it holds it just fine. Beware not to get the big cups since the indentation is small and the weight of the big cup will make it fall over. Keep the big cups in the base cupholder. As you can see my tumbler won’t fit next to the cupholder. A second cupholder would not fit in the Mazda side by side either which disappointed me. I think this all depends on where your car cupholder is located. However, since my cup holder is low between the two seats I am happy that the tray still sits high enough to work for the passenger even if they have thick thighs like me. I installed the cup holder in the back cup because the tray would intervene with the dash board and gear stick. NOW I bought this item because I was going on a road trip and I wanted to be able to use the two pack cup holder and tray. We got a rental car for this trip (Toyota Highlander Hybrid 2022). I decided to try the two cup holders side by side on the Highlander and to my surprise THEY FIT!!!!!!! ☺️ I was so freaking excited!! We had a great trip with our drinks and my husband approved of the cupholder as well. So if you have cup holders like the Highlander you might be able to get away with side by side fit. If you have cupholders like the Mazda. I’m sorry but it won’t work for you. Wish it worked with my Mazda since it is my main car . But oh well! PS: if you have a cup holder cover like the one in the advertisement picture they are right. The cup holder does NOT fit. That’s what my husband’s car has so now I do not know what to do with my second cupholder. Guess I have to buy a Highlander now!